
Current Issue
Science & Cycling Conference, Barcelona 2026
-
Accurate video tracking of indoor cycling races
We present a computer vision method combining accurate field calibration and innovative localization algorithm, enabling to provide automatically the precise trajectory of cyclists on a track race hence allowing quantitative analyses, including power production estimates based on the measured trajectory combined with a physical model.
-
Current state of Safety Tracking and Race Monitoring Devices in Cycling
Recent race incidents in professional road cycling have renewed concerns regarding rider safety, with multiple high-profile crashes resulting in severe or long-term injuries. Data from ProCyclingStats show an increased frequency in reported rider injuries over the past years1. These trends coincide with rising average race speeds, denser peloton dynamics, and increasingly complex road infrastructures, all of which contribute to elevated crash risk and more serious injury outcomes. As a result, the demand for effective technological solutions that support real-time monitoring, rapid incident detection, and coordinated race response has intensified.
In response, several safety tracking and race monitoring systems have been introduced in recent years, aiming to improve situational awareness for race organizers and enhance post-incident response times. However, despite notable technological progress, the current ecosystem of cycling safety trackers presents significant limitations that hinder widespread adoption and operational effectiveness. This abstract outlines the current landscape of safety tracking technologies in cycling, highlighting technical challenges, deployment constraints, and gaps relative to the practical demands of race environments.
One of the primary challenges is coverage reliability. Professional cycling races frequently traverse remote, rural, or mountainous regions where cellular connectivity is unstable or absent. Continuous, low-latency data transmission remains difficult to guarantee in such environments, limiting the effectiveness of real-time monitoring and automated alerting systems. Closely related is the issue of reliable crash or event detection. Many existing race monitoring solutions including systems developed by Live Insiders, 3BO, Swiss Timing and GeoDynamics prioritize rider positioning and performance-related data . While valuable for race management and broadcast applications, these systems are not primarily designed for robust incident detection, often relying on indirect indicators such as abrupt speed changes or signal loss, which can generate false positives or missed events.
Hardware design represents another critical consideration. Safety tracking devices must be unobtrusive, lightweight, and ergonomically integrated into existing equipment to avoid interfering with rider performance or comfort. Feedback from professional riders has consistently emphasized the importance of minimizing additional physical or cognitive burden during competition. Pilot testing conducted in collaboration with teams such as Soudal-Quick-Step underscored the necessity of incorporating cyclist feedback early in the design and validation process, particularly with regard to wearability, device placement, and perceived intrusiveness.
Finally, technical and operational requirements from race organizers play a decisive role in system viability. Solutions must integrate seamlessly with existing race infrastructure, comply with regulatory constraints, and offer clear value in terms of safety decision-making and emergency response coordination. Without standardized requirements and interoperable frameworks, the deployment of safety tracking technologies risks remaining fragmented and inconsistent across events.
In conclusion, while current safety tracking and race monitoring devices represent an important step toward improving rider safety in professional cycling, substantial gaps remain in coverage reliability, incident detection accuracy, hardware integration, and organizational alignment. Addressing these challenges will be essential to realizing the full potential of in-race safety technologies and reducing the human cost of competitive cycling.
-
Modeling the power-duration relationship: the physiological and practical significance of the time constant parameter
In this paper, we discuss the physiological and practical significance of model parameters within the framework of the three-parameter critical power model, with particular emphasis on the time constant parameter. We show that reparametrizing Morton's formula results in a parameter set in which each parameter adjusts distinct parts of the power-duration curve and carries a strong physiological interpretation. Consistent with our hypothesis, we demonstrated using a large dataset that similar curvature constant (W’) values can arise from markedly different combinations of its underlying components. Therefore, we conclude that considering W’ in isolation is inherently ambiguous, unless the anaerobic power capacity as well as the time constant parameter are also considered. Moreover, we argue that the three-parameter critical power model provides a framework which enables an enhanced characterization of cyclists compared with the two-parameter critical power model. Finally, we discuss the potential practical applications of our findings for coaches, practitioners as well as scientists.
-
How simulated lead-up exercice-induced fatigue affects the sprint performance in elite road cyclists?
This study aimed to characterize the effects of one-minute fatiguing exercise simulating the approach to a final sprint in road cycling on the capacity to produce maximal power output during that sprint. Twelve elite male cyclists participated in a single test session. First, cyclists performed a force-velocity (F-V) test on a cycle ergometer to determine their maximal force-velocity-power (F-V-P) profiles. Second, after one minute at 6.4 ± 0.4 W·kg⁻¹ with power variations simulating the approach to a final sprint in road cycling, they immediately performed a 5-s single sprint F-V test to assess the alteration of the F-V-P profile (POST-1MIN). Finally, they directly performed 15-s isokinetic sprint 82.5% of Vopt, immediately following by a 5-s single sprint F-V test to assess the final alteration of F-V-P profile (END). Results show that this one-minute exercise led to a significant reduction in maximal power (−25 ± 7%), maximal force (−9 ± 7%), and optimal pedaling rate (−17 ± 7%), with a more pronounced decrease in velocity capabilities for initiating the final sprint, highlighting a state of fatigue. Then, at the end of the final sprint, maximal power further decreased by 18 ± 7%, with a “parallel” shift in the F-V profile. The mean power output during the final sprint was strongly associated with the Pmax determined after the one-minute exercise. These results highlight that determining the F-V-P profile under fatigued conditions seems essential to better assess the sprint performance ability of riders in competition.
-
Advances in the Leiden Power-Heart Rate model
Purpose: To better model riders’ physiological response to prolonged exertion beyond the non-linear relationship between power and heart rate, with the aim of assessing fitness in the field. Methods: The Leiden PHR model captures the non-trivial relationship between power (external load) and heart rate (internal load), shown to provide insights into a rider’s fitness level 1,2. Because heart rate is influenced by factors beyond recent power history, we modeled the remaining unexplained variance using the machine learning model XGBoost. Additional explanatory variables included cumulative effort (in five alternative ways), atmospheric conditions, geographic location, and current altitude and slope. Feature importance methods were used to assess the relative contribution of variables. Results: As in the earlier models, convolved pedal power was the strongest predictor, followed by a mixture of local parcours properties and cumulative effort indicators. Although atmospheric conditions and geographic location offered some minimal contribution, the same information can be obtained from other variables. The most accurate model used a mixture of variables (R2 = 0.81, compared to R2 = 0.70 for the existing model, with the average error being
-
Time Spent Above 90% and 95% of V̇O2max During Three High-Intensity Interval Cycling Protocols
Maximising time spent at high fractions of maximal oxygen uptake (V̇O2max) is considered an important target of high-intensity interval training (HIIT). This study compared the accumulated time spent at ≥90% and ≥95% of V̇O2max during three work- and effort-matched cycling HIIT protocols. Twelve level 3–4 male cyclists completed Short HIIT (15 × 43.5 s work/43.5 s recovery), Long HIIT (4 × 3 min work/3 min recovery), and decreasing power output HIIT (6 × 114.5 s work/114.5 s recovery) in a randomised crossover design. Pulmonary gas exchange was measured breath-by-breath, and the accumulated time above 90% and 95% of V̇O2max was calculated for each session. Significant differences were observed between protocols for both outcomes. Long HIIT produced greater time above 90% of V̇O2max (580 ± 61.8 s) than decreasing power output HIIT (512 ± 77 s) and short HIIT (422 ± 90 s). A similar pattern was observed above 95% of V̇O2max, with long HIIT (404 ± 126 s) exceeding decreasing power output HIIT (308 ± 131 s) and short HIIT (193 ± 69 s). Peak blood lactate concentrations did not differ between protocols. These findings suggest that, under matched 1:1 work-to-recovery conditions, longer intervals may provide a greater acute near-maximal aerobic stimulus than shorter intervals.
-
Cycling Performance Optimization, A New Telemetry System to Study Tire Inflation Pressure
This study investigated the relationship between tire inflation pressure (ranging from 4 to 10 bar) and rolling resistance force to optimize cycling performance at a concrete velodrome, using a new low-cost telemetry system also the aerodynamic coefficient in real-time. Results revealed significant differences between pressures up to ±9% absolute power to maintain the same speed, while the aerodynamic coefficient remained stable. Concluding that using telemetry to determine ideal pressure settings can significantly improve mechanical efficiency and overall athlete performance.
-
Acute Hemodynamic Responses to Three Work-Matched HIIT Training Protocols in Trained Cyclists
Current literature indicates that studies comprehensively examining acute central and peripheral hemodynamic responses to different high-intensity interval training (HIIT) modalities in trained cyclists remain limited. Therefore, this study aims to compare the acute central cardiac output (Q), stroke volume (SV) and peripheral arteriovenous O2 difference (a−vO2diff) responses elicited by three distinct HIIT models and to determine which modality provides a greater acute stimulus to the respective physiological components. Twelve trained male cyclists (Level 3-4) participated in this study (age: 29.7 ± 5.3 years; maximal oxygen uptake (V̇O2max): 57.8 ± 4.1 mL·min-1·kg-1; body mass: 69.8 ± 6.0 kg). Acute hemodynamic responses were evaluated with three work- and effort-matched HIIT models administered in a randomised order: Long-HIIT (4×3 min work- 3 min recoveries), Short-HIIT (1 series of 15×43.5 sec work - 43.5 sec recovery), and Decreasing Power Output HIIT (DPO-HIIT; 6×114.5 sec work - 114.5 sec recovery). Q, SV, and a−vO2diff were measured using a non-invasive inert gas rebreathing method (N2ORB). Two-way repeated-measures analysis of variance revealed no significant main effect of the protocol for Q (F(2.000, 22.000)=1.966, p=0.178, ηp2=0.152), SV (F(2.000, 22.000)=0.790, p=0.446, ηp2=0.067), heart rate (HR) (F(2.000, 22.000)=0.620, p=0.547, ηp2=0.053), or a−vO2diff (F(2.000, 22.000)=1.586, p=0.227, ηp2=0.126). The Protocol × Time interaction was significant only for HR (F(2.467, 27.132)=4.561, p=0.014, ηp2=0.293). Consequently, while overall systemic stress remains matched, coaches and athletes can utilise these different HIIT structures interchangeably, which may allow for flexibility in endurance training prescription.
-
Training Load Control During Training Camp Using Hematological Biomarkers and Digital Training Data
This study examined hematological and cytokine responses during a supervised 10-day triathlon training camp with individualized, lactate-threshold–based intensity prescription in amateur athletes. Eighty-four participants were enrolled, and a biomarker subcohort (n = 59) underwent serial blood sampling at baseline, day 5, and day 10. Training load was managed using individualized heart rate, power, and pace targets, digital training data aggregated in TrainingPeaks, session-RPE, coach observations, and interim complete blood count monitoring. Cytokine profiling was performed post hoc and did not influence real-time training decisions. Despite a twofold increase in cycling session duration on the corresponding sampling days, perceived exertion remained stable. Individual load modifications were made when signs of disproportionate physiological stress were identified. Complete blood count showed moderate increases in leukocytes and neutrophils, with transient lymphocyte redistribution, while all values remained within reference ranges. Cytokine profiling showed reduced CXCL10/IP-10 and interleukin-8 concentrations, alongside increased interleukin-1 receptor antagonist and selected growth-factor– and platelet-associated mediators. Overall, the findings support the feasibility of combining threshold-based prescription, digital training records, and interim hematological monitoring for practical load supervision during intensified triathlon training in heterogeneous amateur athletes.
-
Péronnet and Thibault's endurance index predicts maximal aerobic power deterioration over prolonged cycling duration
INTRODUCTION: The capacity to resist deterioration in physiological characteristics, such as maximal aerobic power (MAP), during prolonged exercise, is a determinant of cycling performance. This capacity has recently been defined as physiological resilience or durability. In 1989, Péronnet and Thibault proposed equations to model the power-duration relationship. The model estimates, from athletes' peak power records (PPR), anaerobic capacity, MAP, and an endurance index (E). E represents the rate of decline of sustainable aerobic power with prolonged exercise duration. However, the connection between E and MAP durability has yet to be investigated. METHODS: The study explores the relationship between E and MAP percentage decline across prior work levels. PPR at four prior work levels (0, 30, 40, and 50 kJ/kg) were recorded over durations ranging from 15 to 3600 s on fifty male professional cyclists (age: 23.0 ± 5.3 years; body mass: 67.8 ± 6.1 kg; V̇O₂max: 74.8 ± 5.8 ml·min⁻¹·kg⁻¹). The Péronnet and Thibault model was fitted to each PPR profile, at each prior work level. RESULTS: The model fitted PPR with mean absolute percentage errors ranging from 1.6 ± 0.6% to 2.2 ± 1.7%. Mean MAP declined from 396 ± 49 W, without prior work, to 349 ± 73 W after 50 kJ/kg (−13.9 ± 12.4%). Baseline MAP and E were strongly correlated (r = 0.85, p < 0.001). After adjusting for this relationship, E was significantly associated with MAP percentage decline (partial r = −0.34 to −0.40, p < 0.02) across all prior work levels. Linear regressions including both E and MAP explained 53% to 68% of the variance in MAP percentage decline. DISCUSSION: These findings suggest that E captures much of the durability construct. Péronnet and Thibault’s endurance index provides a practical means of assessing durability from routinely available PPR data, without requiring extensive fatigue protocols.
-
Effect of Cyclist Formation Size on Wind Speed and Direction
Purpose: To examine how different cyclist formation sizes influence wind speed and direction. Methods: A female national-level cyclist (24 years; 159 cm; 51 kg) rode on a 100-m indoor track at 20 ± 1 km/h. Wind speed and direction were measured at the lead and last riders using a custom three-hole Pitot tube with an anemometer (1 Hz). Four straight-line single-file formations (2–5 riders) with 1-m inter-rider spacing were tested, each repeated twice. Results: Increasing formation size progressively reduced wind speed for the last rider: ~30% for 2 riders, ~38% for 3 riders, and ~41% for 4–5 riders. Wind direction angles also shifted with formation size (1–8°). The four-rider formation offered the best aerodynamic balance. Conclusions: Formation size significantly affects the aerodynamic conditions for trailing cyclists, with four-rider formations providing optimal drafting benefits.
-
No sex differences in durability and repeatability during an intermittent fatiguing cycling protocol
1. Introduction
In modern cycling, a rider’s capacity to repeatedly produce maximal sprints throughout a prolonged race and express high-power outputs in fatigued condition represents a key determinant of elite performance [1]. Recently, female cyclists were reported to experience lesser reductions in submaximal thresholds than males after heavy intensity constant cycling [2], together with a greater ability to maintain absolute peak power output, work and speed across repeated cycling sprints [3]. However, data regarding sex differences in the ability to maintain performance during more real-world intermittent cycling tasks is scarce. Therefore, this study aims to investigate the effects of fatigue developed during 90 minutes of prolonged intermittent cycling on sprint performance [i.e., peak power output (PPO)] and performance during a 5-min time-trial (5 min-TT) and their underpinning physiological mechanisms in both sexes.
2. Materials and Methods
40 cyclists (20 males, age 33±11 years, V̇O₂peak 54±8 ml.kg⁻¹.min⁻¹ and 20 females, age 35±11 years, V̇O₂peak 46±7 ml.kg⁻¹.min⁻¹) visited the laboratory on three occasions. In visit one, participants underwent a body composition assessment and performed a graded incremental exercise test to exhaustion as well as familiarization with the 5-min time trial and the 6 s maximal sprint. The second and third visits took place in random, counterbalanced order and involved either (i): FRESH: a 6 s maximal sprint, a 5-min time trial immediately followed by another 6 s maximal sprint, or (ii) FATIGUED: a 6 s maximal sprint, 90 min at 90% of first lactate threshold (LT1) interspersed with 4 series of 8 sets of 20 s at 120% of maximal aerobic power (MAP) + 40 s at 30% MAP. 2 min after each series a 6 s maximal sprint was performed (4 in total). Immediately after the 90 min fatiguing intermittent cycling protocol, the 5-min time trial and the 6 s maximal sprint were performed.
During all visits, pulmonary ventilation (V̇E), oxygen uptake (V̇O₂), carbon dioxide production (V̇CO₂), heart rate (HR), and rating of perceived exertion (RPE) were recorded, and blood lactate (bLa) was collected.
3. Results
MAP (males 331±35 vs females 210±32 W), PO at LT1 (males 201±22 vs females 129±16 W), and at second lactate threshold (males 270±36 vs females 172±27 W) achieved during the graded-incremental test were higher in males vs females (all p<0.001). The mean power output achieved during the 5 min-TT decreased (p<0.001), similarly in both sexes (males -8.7±6.9% vs females -8.8±6.5%, p=0.978) following the prolonged intermittent cycling protocol. Similarly, the PPO achieved during the 6 s maximal sprint was reduced after the fatiguing protocol (p<0.001), without sex differences (males -11.5±8.8% vs females -13.3±10.1%, p=0.556). Moreover, during the 5 min-TT performed in fatigued condition, HRmax (p=0.001), bLamax (p<0.001) and VO₂peak (p=0.027) decreased similarly in males and females (p≥0.280) compared to the same trial performed in fresh condition. Moreover, during the 90-min intermittent protocol, HR, Bla, RPE and fat oxidation increased overtime (p<0.001), while RER and carbohydrate oxidation decreased (p<0.001), without sex differences (p≥0.097).
4. Discussion
After the prolonged intermittent cycling protocol, mean power output during 5 min-TT and 6 s PPO were significantly impaired. Surprisingly, no sex differences were detected neither in the decrement of performance after the 90-min fatiguing intermittent protocol, nor in the physiological changes that occurred during. These findings highlight that sex differences in fatigue resistance are “task specific”. Indeed, when investigating sex differences in fatigue resistance, severe- or maximal-intensity metrics of performance (5 min-TT and PPO) following a high intensity intermittent task, findings contrast the sex differences in durability observed in submaximal markers of performance (thresholds) following a steady state heavy-intensity protocol [2].
-
Beyond a Single Time Constant: Evaluating the Cross- Protocol Transferability of τW′ in Cyclists
The quantification of W′ reconstitution kinetics (τW′) is central to W′ balance (W′BAL) modelling, yet whether an individualized τW′ can be transferred across different intermittent exercise structures remains unclear. This study examined the cross-protocol transferability of a reference τW′ derived from a 60 s - 30 s high intensity interval training (HIIT) protocol. Six trained male cyclists completed baseline testing and four exhaustive HIIT protocols: 60 s–30 s HIIT, short HIIT (S-HIIT), long HIIT (L-HIIT), and decreasing power output HIIT (DPO-HIIT). The τW′ required to yield W′BAL = 0 kJ at task failure during 60 s - 30 s HIIT was defined as Ref-τW′ and subsequently applied to the other protocols. End-exercise W′BAL differed across protocols (p<0.001). Ref-τW′ produced the smallest bias and root mean square error during S-HIIT (3.3 and 4.3 kJ), whereas larger errors were observed during L-HIIT (6.5 and 7.0 kJ) and DPO-HIIT (6.8 and 7.4 kJ). Protocol-specific τW′ values also differed (p<0.001), with no differences between 60 s - 30 s and S-HIIT or between L-HIIT and DPO-HIIT. These findings indicate that τW′ is protocol dependent and that a single individualised value may not accurately transfer across distinct HIIT structures. Transferability therefore appears greater between protocols with similar work and recovery characteristics.
-
Data-Driven Computational Framework for Personalized Training Plans in Cycling
Context: The widespread adoption of mobile power meters and heart rate monitors has transformed professional and amateur cycling into a highly data-driven discipline. Despite this massive collection of longitudinal sensor data, day-to-day training prescription still relies heavily on manual expert judgment rather than formalized mathematical optimization. While the predictive modeling of athletic performance has made significant advances, the transition from descriptive monitoring to automated, data-driven training prescription remains an unrealized opportunity in endurance sports.
Methods: To address this gap, this study introduces a modular computational framework designed to automate the generation of personalized cycling training plans. First, we extract a continuous performance metric, PO@HRtarget, utilizing longitudinal submaximal power output and heart rate data. Specifically, this metric filters historical training data for efforts within a personalized target heart rate range and employs linear interpolation to normalize the power output to this target heart rate, bypassing the need for disruptive and infrequent maximal laboratory testing. Second, we extract cycling-specific features from daily training data to capture the dose-response relationship, quantifying training load and intensity distributions through metrics like Training Stress Score, Acute and Chronic Training Loads, Chronic Intensity Load, and the Polarization Index. Third, we model the relationship between these training inputs and performance outputs using four diverse regression architectures: Lasso, Random Forest, XGBoost, and a novel tree-based model called Random Forest Featuring Linear Extensions (RaFFLE). These models are rigorously evaluated using 10-fold cross-validation, incorporating a seven-day buffer to combat data leakage. Finally, we apply a differential evolution algorithm to invert these predictive models, generating optimized training prescriptions, defining weekly durations, training load increases, and time-in-zone distributions, designed to maximize future athletic performance.
Results: Validation against laboratory testing confirmed that the submaximal PO@HRtarget metric effectively tracks true physiological trends in the first lactate threshold. During the predictive modeling phase, the models achieved an average out-of-sample Mean Absolute Error ranging between 5 and 10 W, which aligns closely with the intrinsic ±1.5% measurement uncertainty of commercial power meters. Furthermore, feature importance analysis revealed that chronic training load (e.g., CTL56) consistently emerged as the dominant predictor of performance across all model architectures. Our analysis also revealed significant inter-subject variability across cyclists; while linear models like Lasso accurately predicted performance and provided the lowest test error on average (7.17 ± 2.70 W), other athletes required complex non-linear tree-based ensembles to accurately capture the dose-response relationship. During the prescriptive phase, the optimization algorithm demonstrated a potential average performance increase of 5.5% when generating individualized training schedules targeting the PO@HRtarget metric. Conclusion: This framework successfully bridges the gap between predictive analytics and prescriptive decision-making in endurance cycling. By combining robust feature extraction from daily training data with advanced optimization techniques, it supports the automated generation of training plans that adapt to an athlete's evolving physiology. Ultimately, this methodology offers a scalable, sport-agnostic pathway for coaches and athletes to transition from retrospective data analysis to individualized performance optimization based on historical training data. Furthermore, future iterations of this framework should examine the relationship between this performance metric and daily recovery indicators, such as heart rate variability (HRV), sleep quality, and fatigue, to better account for daily fluctuations in an athlete's capacity to execute a prescribed plan.
-
Mental health and performance sustainability in elite men's cycling: A qualitative study of recently retired professional riders
Elite cycling requires sustained psychological adaptability across prolonged high-performance careers and complex career transitions. While mental health burden in professional cycling have been increasingly reported, less is known about how former elite riders retrospectively experience psychological demands and support structures across and beyond their competitive careers, and how these experiences relate to performance sustainability. This qualitative study explored psychosocial experiences of retired professional cyclists with a particular focus on the interaction between organisational structures, perceived autonomy, transition clarity, and performance continuity; examining whether and how mental health factors identified by athletes themselves may influence both competitive performance and career longevity.
Semi-structured interviews were conducted in 2025 with thirteen retired male professional cyclists (Pro Continental–WorldTour level; age at interview: 28–45 years, median 39; minimum seven years of professional experience). The sample represented substantial cumulative elite exposure, comprising a total of 100 WorldTour seasons (range 0–12; median 11), 130 Grand Tour participations (range 0–29; median 8), and 200 starts in major one-day Classics (range 0–36; median 13). Across all participants, the combined number of professional career victories was 214 and the median number of victories was 5; the range for victories is not reported to minimise re-identification risk in this small, high-profile sample. Time since retirement ranged from approximately 1.5 to 8.5 years (median ~2.5 years).
Thematic analysis identified four multilevel domains shaping performance sustainability and post-career adaptation: (1) structural employment and career conditions (e.g., short-term contracting, career uncertainty); (2) performance-regulatory and recovery demands (e.g., body weight management, sleep and recovery optimization practices); (3) organisational support and confidentiality climates (e.g., limited access to independent psychological support, concerns about disclosure); and (4) transition resources and post-career adjustment (e.g., identity reconstruction, financial planning, absence of structured pathways).
Across accounts, unclear career and post-career perspectives were described as sources of persistent cognitive load that reduced psychological availability for performance and injury adaptation, whereas greater transition clarity and perceived support were associated with increased psychological stability and performance focus. Rather than representing isolated clinical issues, these domains reflect structural features of elite cycling that shape psychological regulation across the entire career continuum. From the athletes' perspective, factors such as contract insecurity, limited confidential support access, and little developed transition frameworks were experienced not only as sources of distress but as direct constraints on their capacity to maintain performance focus and adapt to competitive demands.
Optimising professional cycling may therefore require integrating autonomy-supportive practices, confidential mental health pathways, evidence-informed guidance at the medical–performance interface, and transition-oriented planning into existing high-performance systems. Such approaches may not only support long-term athlete wellbeing, but also enhance performance stability by reducing cognitive load and strengthening psychological safety, suggesting that systematic mental health infrastructure represents both a medical necessity and a performance-relevant investment aligned with the competitive objectives of elite cycling organisations.
-
Supporting life beyond the finish line: A cross-sectional analysis of retirement transition policies for professional riders in European cycling
Transitioning out of professional sport can present challenges for athletes and their wider environments, frequently necessitating coordinated physical, psychological, and economic support. Although these concerns have been documented in elite cycling, the extent to which structured transition programmes exist within the sport remains insufficiently understood, particularly in Europe, the historical centre of professional cycling. We conducted a cross-sectional qualitative documentary analysis, distributing a standardised inquiry to all European Cycling Federations (ECFs; N = 51) between December 2024-March 2025. Federations were asked whether they had formal strategies, policies, or resources related to athlete retirement. Responses were categorised as “ECF-level literature or initiative”, “No ECF-level provision”, or “No response” and relevant materials were descriptively synthesised. Amongst the 21 federations that responded, the majority (n = 17; ≈81%) reported no ECF-level retirement initiatives. Common reasons included limited resources, low perceived demand, or reliance on national or international bodies (i.e., Olympic Committees or sport-specific unions). Four ECFs (~19%) described transition-related structures, though these varied considerably in scope, definition, and delivery. Despite well-documented needs, structured retirement support for professional cyclists remains uncommon across European national federations, and existing programmes appear heterogeneously applied. As cycling expands globally, effective transition planning becomes increasingly important for athlete wellbeing and the long-term sustainability of the sport. Holistic, international collaborations led by cycling’s major governance bodies could strengthen career-long support systems, reinforce the public image of cycling as a health-promoting discipline, and create responsible, athlete-centered ecosystems.
-
Validation of unsteady aerodynamic effects under real-world apparent flow conditions using high-frequency wind sensing and cycling performance data
Aerodynamic drag is the dominant resistance term in road cycling at moderate to high speeds, yet real-world assessment remains challenging because the flow incident on the rider–bike system is disturbed, unsteady, and strongly route dependent. In controlled environments, cycling aerodynamics is typically characterized through steady wind-tunnel measurements and steady Computational Fluid Dynamics (CFD). However, agreement between CFD and wind-tunnel data does not necessarily translate into accurate performance prediction outdoors, where riders experience rapidly varying apparent wind due to meteorological variability, terrain effects, traffic-induced disturbances, and yaw-angle changes from steering and cornering. This motivates the need for a validation approach that explicitly represents the outdoor wind state and its unsteadiness.
We present a test and validation toolchain designed to bridge this validation gap by correlating steady-state aerodynamic maps with time-resolved measurements recorded in real riding conditions. The central contribution is demonstrating that comparison-ready aerodynamic descriptors can be reconstructed from standard cycling performance signals when these are combined with enhanced, high-frequency apparent wind sensing. Apparent flow is measured and expressed through apparent wind magnitude $v_{\infty}$ and apparent yaw angle $\beta_{app}$. Inflow unsteadiness is quantified using segment-based Gust Intensity (GI) and Turbulence Intensity (TI), enabling outdoor datasets to be compared on the basis of both mean flow state and fluctuation level.
A representative validation use case combines Windpuls apparent wind sensor logging with common bike-computer data (e.g., Garmin, Wahoo), including power, speed, cadence, and altitude/grade information, alongside air-density inputs derived from temperature, pressure, and humidity. Data streams are time-aligned and analyzed in route- or lap-based segments. Measured mechanical power is converted to a conservative resistive-power signal by removing gravity and inertia contributions, and is then normalized using dynamic pressure based on measured apparent wind to compute a coefficient-like metric suitable for cross-condition comparison. This normalization yields a time-resolved, comparison-ready resistance descriptor that can be aggregated within yaw bins to reconstruct an outdoor yaw-sensitivity curve.
We demonstrate the pipeline for two operating environments: (i) road riding, which captures realistic variability in wind and terrain, and (ii) an outdoor velodrome, which provides repeatable geometry to isolate and interpret wind-driven effects under controlled lap structure. Across repeated passes, reconstructed yaw sensitivity remains consistent over a wide apparent yaw-angle range. Increased scatter at higher yaw angles is primarily attributable to quantified inflow unsteadiness (higher GI/TI) and reduced sample density at large yaw, rather than to a breakdown of the reconstruction approach. By reporting yaw distribution together with GI and TI, the framework provides a principled basis for selecting comparable subsets of outdoor data and for avoiding over-interpretation of day-to-day variability.
Overall, the pipeline supports rapid equipment or position comparisons in field tests while transparently documenting the wind-state context. The approach offers a scalable pathway to evaluate performance-relevant cycling aerodynamics under realistic, dynamic flow environments and to connect outdoor findings back to steady-state maps from CFD and wind-tunnel testing.
-
A mobilization index for intermittent work: combining breathing frequency and heart rate for training intensity monitoring
Background
Heart rate (HR) remains the most widely used indicator for monitoring athletes’ internal load during training sessions. However, limitations appear during short work-to-rest intervals. First, HR kinetic is inherently slow, with peak values occurring several seconds after the onset of exercise (Nicolò et al., 2020). Second, HR often reaches a ceiling effect: once athletes approach an average HR, further increases in exertion are no longer reflected in the HR signal (Dellal et al., 2012). Breathing frequency (BF), on the other hand, is closely associated with rating of perceived exertion (RPE) (Nicolò et al., 2016) and is regulated by rapid mechanisms, including type III/IV muscle afferent feedback and central command, making it highly responsive (Nicolò & Sacchetti, 2023). These characteristics suggest that BF may be more sensitive than HR to the dynamic stress experienced during interval training. Combining information from HR and BF could therefore provide a more complete picture of the athlete’s internal response (Seiler, 2024). The aim of this study was twofold: (1) to compare HR and BF responses during a high intensity interval session, and (2) to explore the potential of combining the two metrics into a single index — termed the mobilization index — to better reflect perceived training stress.
Methods
Thirteen male athletes (age = 31.8 ± 9.7 y, body mass = 77.5 ± 9.8 kg, height = 1.82 ± 0.06 m, VO2max = 56.2 ± 5.4 mL/min/kg, Power@LT2 = 3.8 ± 0.3 W/kg, training volume = 9.0 ± 2.8 hours/week) trained in cycling and running participated in the study, comprising four visits to the laboratory. During the first two visits, participants completed maximal incremental running and cycling tests in a same session. The first visit included a facemask for gas exchange measurement, whereas the second did not. Third and fourth visits consisted of sessions of a 5 minute warm up, followed by 40 minutes of low intensity work at 90% of the first ventilatory threshold (VT1), then a ramp protocol with one-minute steps to maximal exertion. Finally, participants performed two sets of ten 40-second work intervals interspersed with 20 seconds of passive recovery. A 5-minute recovery was observed between each part of the session. Throughout all sessions, HR was recorded via ECG and BF via a strain-measuring belt. Maximal heart rate was defined as the maximal value reached over any of the session, while maximal breathing frequency was defined as the highest 5-second rolling average of the 1Hz signal. Heart rate reserve (HRR) and breathing frequency reserve (BfR) were calculated using Karvonen’s formula (Karvonen et al., 1957). A mobilization ratio was computed for each interval as BfR/HRR. To describe the kinetics of maximal BF and HR values reached throughout the intervals, three models were tested: linear, exponential, and exponential with a drift constant. A linear mixed model was fitted to the mobilization ratio. The final value of the mobilization ratio in each set was tested using a one sided hypothesis t-test, aligned with the hypothesis that the ratio would exceed 1 at the end of the session.
Results
Maximal BF during the ramp did not differ significantly between running and cycling (Δcycling-running= 2 bpm; p=.43) but did during submaximal effort (Δcycling-running = -10 bpm; p=.03). None of the participants reached maximal BF during mask on trials. In contrast, eight athletes reached maximal HR during the masked ramp test. Linear models yielded the lowest Akaike Information Criteria for both HRR and BfR, suggesting that a linear description best captured their progression across intervals. The effects of interval number and set number were greater for BfR (βinterval=0.067; βset =0.028) than for HRR (βinterval =0.010 ; βset =0.013). In exponential models, asymptote was lower for HRR (Aestimate=92%) than for BfR (Aestimate=150%), and growth rates were higher for BfR. In the drift adjusted exponential model, the rate of increase was not significant when modelling BfR (p = .58). Modelling results suggest that both HR and BF tend to increase linearly throughout repeated high intensity intervals, yet BF displays a steeper and more variable increase than HR. While HR frequently plateaus, BF continues to rise, matching the progressive nature of rate of perceived exertion (RPE) during such sessions. This supports the interpretation of BF as a sensitive marker of real time internal load. Across interval sessions, athletes exercised at approximately 139 ± 5% of power at VT2. No significant difference in blood lactate (µ1 = 11.98 mmol/L, µ2 = 13.3 mmol/L, p = .91) was observed between the two interval sets. Higher RPE values (µ1 = 18.2, µ2 = 19.0, p = .04) were reported in the second set. The mobilization ratio exceeded 1 at the end of the second set (M = 1.05, p = .003, d = 1.26), but not at the end of the first (M = 0.90, p = .95, d = 0.61), supporting the idea that the ratio could reflect the accumulated stress throughout the session.
Conclusion
Breathing related metrics are often examined to derive metabolic thresholds; however, BF also offers valuable insights into internal load monitoring, particularly during short intervals where HR may not fully reflect rapid changes in exertion. Practitioners should calibrate BF training zones separately for each modality (running vs. cycling), and these zones should be based on maximal BF values obtained without a mask, assuming a reliable BF monitor is used.
-
Automated workflow for 4D scanning cyclists in motion
Recent advances in human body modeling have enabled high-resolution reconstruction of articulating subjects in motion. MOVE4D (Instituto de Biomecánica de Valencia) demonstrate the capability to generate watertight 3D meshes of moving humans. However, when a subject interacts with an object—as in cycling—conventional homologous registration approaches fail to produce accurate watertight models due to geometric interference between the body and equipment (Van Gastel & Verwulgen, 2022). This limitation has significantly constrained the study of object-assisted movement and dynamic aerodynamics.
In this study, we present a fully automated 4D scanning workflow specifically designed to address this challenge for cyclists in motion. The system captures high-resolution, time-resolved point clouds (±1 mm, up to 178 Hz) over complete pedal cycles and synchronizes them with multiple external force sensors. The principal advancement is a dedicated pointcloud processing pipeline that isolates the cyclist from the bicycle without requiring intrusive physical modifications or restrictive scanning conditions.
The processing workflow comprises four main steps: (1) detection of the bicycle’s position and orientation using three colored reference markers; (2) alignment and insertion of a CAD-generated bicycle model into the captured point-cloud scene; (3) removal of all points within a defined proximity of the virtual bicycle model; and (4) cluster-based filtering to retain only the largest remaining geometry, corresponding to the human subject. The resulting clean 4D point clouds are subsequently converted into watertight models, eliminating geometric interference between body and equipment while preserving temporal consistency across frames. Synchronization with pedal and saddle force measurements enables precise temporal coupling between external loading and body surface kinematics.
The developed workflow transforms dynamic cyclist reconstruction from a constrained experimental setup into a scalable, repeatable methodology, enabling rapid generation of watertight, force-synchronized 4D cyclist models for quantitative biomechanical analysis (De Rosario et al., 2023). The resulting scans can be exported to widely supported formats (e.g., .stl, .obj), ensuring interoperability across analysis and simulation software. This technological foundation enables applications in bike fitting, movement stability assessment, fatigue monitoring, equipment and garment development (Yang et al., 2022), and time-resolved CFD simulations of cyclist instability (Winter et al., 2025). Furthermore, the workflow is extendable to other forms of object-assisted human movement.
-
Timing of Sodium Bicarbonate Uptake During Exercise and Rest in Highly Trained Cyclists
Sodium bicarbonate (SB) has been extensively studied for its ergogenic effects in short-duration, high-intensity exercise (Grgic et al., 2021). More recently, SB has been increasingly used in endurance disciplines such as triathlon, road cycling, and cross-country skiing, to enhance performance during decisive, high-intensity efforts (Dalle et al., 2021). However, the influence of prolonged low-intensity exercise following SB ingestion on blood bicarbonate (HCO₃) uptake kinetics remains unclear. Therefore, this study aimed to assess the effects of low-intensity cycling compared with passive rest following SB ingestion on HCO₃ kinetics, including the timing and magnitude of peak HCO₃.
Fourteen highly trained cyclists (female n = 5: body mass 53.0 ± 4.4 kg, height 169 ± 6 cm, VO2max 64.7 ± 4.1 mL·kg⁻¹·min⁻¹; male n = 9: body mass 70.9 ± 3.3 kg, height 180 ± 6 cm, VO2max 74.5 ± 7.7 mL·kg⁻¹·min⁻¹) completed three laboratory visits separated by ≥48 h. Visit one involved an incremental step and ramp test to determine lactate threshold 1 (LT1) and VO2max. On visits two and three, participants completed the exercise (EXC) and resting (REST) conditions, with identical time points for data collection. In both conditions, participants consumed a standardized breakfast at 08:00 AM, followed by SB ingestion (0.3 g·kg⁻¹) provided as mini-tablets within a carbohydrate hydrogel mixture at 08:45 AM. During EXC, participants cycled indoors for three hours at LT1 (3.0 ± 0.3 W·kg⁻¹) starting at 10:00 AM, with 50 g·h⁻¹ carbohydrate intake. During REST, participants refrained from exercise and food intake. In both conditions, HCO₃ was measured every 25 min from 08:45 to 10:00, and every 30 min from 10:00 AM to 1:00 PM using a blood gas analyzer (i-STAT Alinity, Abbott, USA). All data were assessed for normality using the Shapiro–Wilk test. Differences in HCO₃ time course were analyzed with repeated measures ANOVA, correcting for sphericity violations with Greenhouse–Geisser when necessary. Post-hoc pairwise comparisons were Bonferroni-adjusted. Effect sizes were calculated using partial eta squared (pη²). Peaks in HCO₃ were identified as the first point within ±0.6 mmol·L⁻¹ of the local maximum, corresponding to a 2% technical error of measurement at 30 mmol·L⁻¹ (Larcher et al., 2023), thereby capturing the initial plateau while minimizing measurement noise. Differences between peak and baseline (08:45 AM) concentrations (ΔHCO₃) and time to peak were compared between conditions using paired t-tests.
All participants completed the protocol without adverse events, such as gastrointestinal problems. Data were normally distributed. A significant condition × time interaction was observed (F(9,117) = 5.36, p < 0.001, pη² = 0.29), indicating that the temporal pattern of HCO₃ differed between EXC and REST. Pairwise comparisons revealed higher HCO₃ concentrations during REST compared with EXC at 30 min (mean diff. = 1.2 ± 1.2 mmol·L⁻¹, p = 0.003) and 60 min (mean diff. = 2.9 ± 2.6 mmol·L⁻¹, p = 0.001) after 10:00 AM (exercise onset in EXC). No differences were observed at any other time point (all p > 0.05). A significant main effect of time was detected (F(9,117) = 197, p < 0.001, pη² = 0.94), reflecting the expected increase in HCO₃ following SB ingestion. However, there was no significant main effect of condition (F(1,13) = 3.95, p = 0.068, pη² = 0.23), indicating similar overall mean HCO₃ concentrations between EXC and REST. ΔHCO₃ did not differ between conditions (EXC: 9.0 ± 1.8 mmol·L⁻¹, CV 20%; REST: 9.3 ± 1.4 mmol·L⁻¹, CV 15%; p = 0.32). In contrast, time to peak HCO₃ was significantly longer during EXC (208 ± 42 min, CV 20%) compared with REST (146 ± 22 min, CV 15%; p < 0.001). Descriptively, responses were similar between sexes, with comparable ΔHCO₃ and time to peak HCO3 in females (EXC: 9.1 ± 1.9 mmol·L⁻¹; 213 ± 46 min; REST: 9.6 ± 1.5 mmol·L⁻¹; 147 ± 16 min) and males (EXC: 9.0 ± 1.9 mmol·L⁻¹; 205 ± 42 min; REST: 9.2 ± 1.3 mmol·L⁻¹; 145 ± 26 min).
In summary, SB ingestion effectively elevated HCO₃, with peak concentrations being comparable between EXC and REST. However, low-intensity cycling delayed the time to peak by ~1 hour, emphasizing the importance of accounting for exercise during the absorption period when planning nutritional strategies for prolonged endurance events. These findings suggest that athletes and practitioners should adjust the timing of SB intake to align peak HCO₃ with critical performance periods during prolonged exercise.
-
Dropped Out - Physiological and perceptual responses at the point of task disengagement in intermittent endurance events
Intermittent endurance events require athletes to perform multiple surges in intensity over the course of a race. These surges usually occur at supramaximal intensities (i.e., above the athletes’ maximal aerobic power - MAP), exacerbating the race’s physiological and perceptual demands. The ability to complete these surges and stay within the leading pack is essential for success in these events, as the race outcome is often decided in the finishing sprint. Many athletes, however, are unable to sustain the demands of these surges, and need to manage their efforts to ensure they can complete the race. Thus, this study had 2 aims: (1) to describe the physiological and perceptual responses at the point of task disengagement during an intermittent endurance event, and to determine whether athletes who skipped a sprint experienced greater physiological and perceptual demands at disengagement than those who did not, and (2) to determine if there were any differences in the determinants of endurance performance between the group that completed all sprints and the group that did not.
The study recruited 14 endurance-trained males (age: 35.5 ± 9.6y; bodyweight: 82.5 ± 10.3 kg, VO2max: 58.9 ± 12.4 ml.kg.min-1). The participants performed a protocol consisting of fifteen 10-second sprints separated by 50 seconds of low intensity cycling (60% maximal aerobic power – MAP). The sprints were performed at an intensity associated with 25% of the athletes’ anaerobic power reserve (APR). Seven participants completed all sprints during the protocol (COMP), while seven skipped at least one sprint (SKIP). On average, participants first skipped a sprint at sprint 9 (60% of the protocol). Therefore, the responses of the COMP group at sprint 9 were used for between group comparisons. An independent samples t-test was used to determine if there were any differences in physiological (oxygen consumption - VO2, heart rate – HR, respiratory rate – RR, blood lactate, muscle activity – expressed as a percentage of the participants’ maximal voluntary contraction – MVC) and perceptual (rate of perceived exertion – RPE, and leg discomfort - LD) responses between groups at the point the participants decided to skip a sprint. The same test was used to assess if there were any differences in physiological and performance characteristics between the two groups (VO2max, MAP, maximal peak power, and APR).
At the point of task disengagement, the participants in the SKIP group had a high oxygen consumption (84.1 ± 6.9% of VO2max), respiratory rate (49.0 ± 5.9 breaths per minute), muscle activity (60.1 ± 17.5% MVC), and blood lactate level (10.4 ± 2.0 mmol.L-1), along with near maximal heart rate (92.8 ± 2.7% HRmax), and high perceptual demands (RPE = 15.7 out of 20, LD = 6.8 out of 10). However, there were no differences in these responses between the COMP and SKIP groups. Despite the lack of statistically significant differences, a moderate to large effect size was reported for respiratory rate (d = 0.73, 95% CI = -0.36 to 1.80), blood lactate (d = 0.75, 95% CI = -0.35 to 1.82), and LD (d = 0.93, 95% CI = -0.19 to 2.03). Participants in the COMP group had significantly higher VO2max (p = .034, mean difference = 13.6 ml.kg.min-1, 95% CI = 1.17 to 26.10 ml.kg.min-1) and MAP values (p = .018, mean difference = 61.4W, 95% CI = 12.5 to 110.2W) than those in the SKIP group.
The results indicate that very high levels of physiological and perceptual demands are attained at the point of task disengagement during intermittent events. However, having a higher VO2max and MAP might allow athletes to withstand these demands during a race. As such, coaches and sport scientists involved in these events should focus on developing their athletes’ aerobic power to increase their chances of success. Lastly, the moderate to large effect sizes reported for physiological (respiratory rate and blood lactate) and perceptual measures (leg discomfort), highlights that further studies are required to determine the importance of these variables to assess exercise tolerance in intermittent endurance events.
-
Cadence influences exercise thresholds and peak power output from a ramp test in recreational cyclists
Purpose
The purpose of this study was to examine how cadence influences performance outcomes and physiological responses during ramp incremental (RI) exercise tests. Specifically, we investigated whether cycling at 70, 90, or 110 rpm affects time to exhaustion (TTE), peak power output (PPO), and ventilatory thresholds (VT1 and VT2), and whether the effect of cadence differs across these exercise intensity levels.
Methods
Nine healthy male recreational cyclists (22.4 ± 1.2 y; 74.9 ± 8.5 kg; 182 ± 5 cm) completed three RI tests at 70, 90, and 110 rpm in randomized order. Breath-by-breath gas exchange was recorded. VT1 and VT2 were determined using standard criteria and their associated PO were corrected for dissociation in the mean response time. Cadence and intensity effects were assessed using repeated-measures ANOVAs.
Results
TTE for the RI tests was longer at 70 rpm (747 ± 103 s), followed by 90 rpm (727 ± 98 s) and 110 rpm (696 ± 96 s) (p < 0.001). Similarly, PPO was highest at 70 rpm (424 ± 51 W), intermediate at 90 rpm (414 ± 49 W), and lowest at 110 rpm (399 ± 48 W) (p < 0.001). Power output at VT2 was progressively lower with increasing cadence (70 rpm: 284 ± 50 W; 90 rpm: 260 ± 47 W; 110 rpm: 239 ± 46 W; p < 0.001). PO at VT1 was higher at 70 rpm (218 ± 46 W) compared with 110 rpm (182 ± 35 W; p = 0.014), while no significant difference was found at 90 rpm (198 ± 43 W). Linear regression analysis showed that the decline in PO with increasing cadence was greatest at VT2 (-1.15 W·rpm⁻¹), followed by VT1 (-0.96 W·rpm⁻¹), and PPO (-0.66 W·rpm⁻¹). There was no significant difference in VO₂peak between the different conditions (70 rpm: 4.2 ± 0.6 L·min⁻¹; 90 rpm: 4.0 ± 0.5 L·min⁻¹; 110 rpm: 3.9 ± 0.4 L·min⁻¹).
Conclusion
Cadence significantly influences key outcomes derived from RI tests, including TTE, PPO, and the PO associated with VT1 and VT2. The greater decline in PO with increasing cadence observed at ventilatory thresholds, particularly at VT2, suggests that submaximal exercise intensities are more sensitive to cadence than maximal performance. These findings highlight that exercise thresholds are cadence-dependent and suggest that prescribing training intensity based on a single threshold value without accounting for cadence may result in substantially different physiological stress.
-
Cognitive performance of healthy volunteers and professional cyclists during high intensity cycling
Are decisions in cycling influenced by the physical load? There is little consensus regarding the relationship between the intensity of acute physical exercise and the quality of decision-making. Theories predict an inverted U-shaped relationship where cognitive performance is optimal during moderate-intensity physical exercise compared to both light and heavy intensities. This aligns with the Yerkes-Dodson law (1908), which posits that the level of arousal is the underlying factor explaining the inverted U-shaped curve. We examined behavioural and computational markers of decision-making during a conflict task across three increasing cycling intensities, up to the heavy domain. Thirty-one healthy volunteers completed the flanker task at light, moderate, and heavy exercise intensities on a stationary bike. In the flanker task, participants respond to a central target (arrow left of arrow right) with a corresponding response key, while ignoring flanking congruent or incongruent arrows. The response keys in this study are mounted on the handlebars. Throughout the experiment, heart rate, oxygen uptake, and rates of perceived exertion were measured and confirmed the prescribed exercise intensities. We used the diffusion model for conflict tasks (DMC, Ulrich et al., 2015) to break down the decision process into biologically plausible and theoretically grounded parameters. DMC analyses showed that drift rate (evidence accumulation) followed the hypothesised inverted U-shaped pattern, peaking at moderate intensity, suggesting optimal evidence accumulation at this workload. In a second study, we tested six elite cyclists from Soudal Quickstep – AG insurance Soudal. They performed the same flanker task in three intensities (based on recent physiological exercise tests): 80% of VT1 (moderate), middle of VT1 and VT2 (heavy), and finally, 5% over VT2 (extreme). Results showed increased performance from moderate to high intensity and, contrary to the healthy volunteers, no overall decline in the highest (extreme) intensity. Individual analyses suggest that sprinters (n=2) show further improvement in the highest intensity. This indicates that the detrimental effects of physical load are less pronounced in professional cyclists. Additional data suggest that sprinters show low body awareness (assessed by the MAIA questionnaire) which might shield against the otherwise negative impact of extreme physical load. Our novel method allows to test cyclists’ cognitive abilities under varying levels of physical load and might in the future be used to develop cognitive profiles.
-
Integrating Pedal Power Variables as Predictors of Iliac Artery Flow Limitation in Cycling: A Pilot Study
Flow Limitation of Iliac Artery (FLIA) is a complex pathology that leads to reduced performance and even withdrawal from cycling. The identification of FLIA through performance loss has been studied by analyzing Power Output (PO) data, providing positive discriminatory markers. In the current era of data availability and the integration of predictive performance models in cycling, the study of discriminatory variables for the potential presence of FLIA is emerging as a useful process for integration and evaluation by performance staff. A 33-year-old male cyclist participated in the study, where external PO developed on the pedals was measured second by second during a Graded Exercise Test (GXT), along with the variables Left-Right Balance (L-R Balance) and Pedal Smoothness (PS). Using the second by second (SBS) data, Effect size test between variables was estimated and a predictive capacity analysis of FLIA were conducted via a Receiver Operating Characteristic (ROC) curve. Small effects were found in PO (d= -0.38, small, 95% CI [-0.52, -0.23] and large effects in L-R Balance (d= -1.97, large, 95% CI [-2.15, -1.79]) and PS (d= 0.82, large, 95% CI [0.67, 0.97]) between the affected and unaffected limb. The ROC analysis showed Areas Under the Curve (AUC) ranging from 0.928 to 0.959, with sensitivity values between 0.88-0.92 and specificity between 0.80-0.84, indicating a high predictive capacity for the studied variables. The logistic model combination of variables showed higher sensitivity and specificity values of 0.90 and 0.92 respectively. The implementation of SBS PO analysis models in cycling could be useful for decision making in the possible presence of FLIA, allowing for the setting of individual thresholds using the discriminatory variables in the study to detect the potential presence of FLIA at an early stage.
-
Do Women and Men Fail Differently? DNF Risk Prediction in Self-Routed Ultracycling (TCRNo10–No11)
We analyse whether women and men differ in Do-Not-Finish (DNF) risk in self-routed ultracycling using Transcontinental Race (TCR) No10–No11 replay tracking. Men rode faster when moving (~10%) but DNF survival curves showed minimal separation by sex. Stopping strategies did not differ. In post-48 h landmark Cox models, early stopped time (within 48h) strongly predicted later DNF while higher moving speed was protective; sex had no effect. Route-aware distance analysis supported these conclusions. Early pacing and stop management (regardless the sex) dominate DNF risk.
-
A simple and accurate wearable device to measure ventilatory threshold: principles and validation
Training zones are key for training and yet, there are only limited tools on the market to make accurate measurements. Coggan and CPxx tests lack accuracy, lactate tests require blood samples, are sensitive to food intake and require protocols with long steps, and ventilatory threshold require expensive, bulky and complex laboratory machines. In this paper, we present a novel device to make measurement of training zones based on ventilatory threshold easy and accessible. The measurement principle of the device is presented as well as a validation study.
-
The effect of geometry simplifications on aerodynamic cyclist posture optimization through numerical simulations
Cyclist aerodynamic performance can be optimized using Virtual Skeleton Methodology, adapting the rider posture, and evaluating its performance through numerical simulations, aiming to minimize overall aerodynamic drag. The goal of the present work is to understand if the outcome of this optimization procedure relies on the presence/absence of a bike or the specific leg orientation, when changing the rider's upper body position. The Generic Cyclist Model in time-trial position is used adapting the lower arm angle. The results show that the flow downstream of the cyclist remains relatively unaltered when removing the bike. The arm position that exhibits minimum aerodynamic drag is also independent of the presence of the bike and, in addition, of the specific leg orientation. This suggests that virtual cyclist posture optimization can be conducted without a bike and considering only a single leg position, which significantly simplifies the optimization process.
-
Cyclist Load-Velocity Relationship during leg-pedaling and how it is correlated with half squat
This study examined how the force–velocity (F–V) profile obtained from maximal “on-bike” sprints corresponds to that derived from the half squat (HS), given the mechanical similarities between both tasks. Eight cyclists completed sprint tests with different gear ratios and an HS assessment using a linear position transducer. Both exercises showed highly linear F–V relationships (R² > 0.85) with nearly identical optimal power loads. Pedal linear velocity strongly correlated with HS mean propulsive velocity (r = 0.954; R² = 0.93), and maximal power outputs were also almost perfectly associated (r = 0.971; R² = 0.95). These findings support viewing short cycling sprints as a strength-oriented action suitable for velocity-based training and individualized load prescription.
-
Building an End-to-End Incident Management Platform for Elite Level UCI Races
Elite-level road cycling races operate in complex, dynamic, and high-risk environments. With race convoys spanning multiple kilometers, high rider speeds, variable terrain, and dense roadside infrastructure, effective incident management is critical for long-term safety improvement. Incident data has historically been fragmented across commissaire reports, broadcast footage, team communications, and post-race medical summaries. In this research, we present the design and implementation of an end-to-end incident management platform used by UCI and SafeR officials that integrates operational, technical, medical, and public data streams into a unified system to support decision-making, safety analytics, and preventive screening for future race editions. For instance in the 2025 season, 640 incidents were recorded involving 802 distinct riders. 88% originate from uci officials vs. 12% sourced from social media. At the core of the platform is structured incident generation by UCI race commissaires operating in-race vehicles. Using Veloviewer as a geospatial interface, commissaires log incidents in real time, tagging GPS coordinates, and inferring race context (stage, sector, kilometer marker), riders or vehicles involved, and preliminary categorization (e.g., crash, obstruction, rule infringement, infrastructure hazard). The in-car workflow is optimized for speed and minimal input, recognizing that the commissaires primary concern remains race supervision. Incident records generated through Veloviewer automatically populate the incident management database, creating a location-specific tag which is further extended after the race. Where available, Video Assistant Referee (VAR) teams provide a second input stream. Utilizing broadcast feeds from fixed cameras, motorcycle and helicopter footage, VAR officials attach video clips to the incident entry. The integration of VAR data reduces reliance on narrative-only descriptions and enables downstream (safety) analysis through computer vision techniques. Following the race, SafeR analysts further validate and extend the information included in the incident (involved riders, causes, etc.). Their role is to reconcile discrepancies between commissaire entries, VAR footage, and social media reports (from verified accounts), or in some cases, add missed incidents. Note that most incident inputs consist of standardized taxonomies to ensure cross comparability across events and seasons. Within the UCI World Tour, team medical representatives contribute further medical data (Fallon et. al, 2026). These include anatomical injury location, and a provisional severity indicator expressed as estimated days out of competition/training. By linking medical outcomes to the original incident record, the platform supports severity-weighted risk analysis rather than relying solely on incident counts. This distinction is important: not all crashes are equal in consequence, and safety interventions should be focused and prioritized based on potential severity. As part of ongoing platform development, we are piloting the integration of AI-enabled tracking devices capable of automated crash detection. These wearable or bike-mounted devices combine sensor and GPS values with machine learning models to identify crash-like events in real time. Beyond crash detection, aggregated tracking data provide contextual variables such as rider density, relative speed differences, speed entering technical sectors, and peloton configuration at the moment of impact. While experimental, these data streams offer an evidence base to better inform regulatory interventions, including targeted speed-reduction measures and other safety-focused rules introduced by the UCI. Beyond management and post-event analysis, a key innovation of the platform is its reuse of incident data for proactive safety screening in future race editions or other races using overlapping routes. Geospatial clustering algorithms identify high-incidence zones, such as specific descents, roundabouts, road narrowings, or finish straight configurations, and generate risk flags when these segments appear in proposed race itineraries. Historical incident profiles are presented to organizers and safety delegates during pre-race screening. This allows incident data to be used in a predictive planning tool and provides a data driven way of tagging dangerous points in combination with the machine learning based video analysis output on pre race parkour recordings (traversed with a camera on a car). The implementation of this end-to-end incident management system demonstrates that improved safety insights in elite cycling is achievable through structured data, captured from multi-source integration design. By connecting in-race officiating, video review, digital public signals, expert analysis, medical outcomes, and forward-looking route screening, the platform provides a holistic view of race risk. As elite road cycling continues to evolve in speed, technology, and global reach, such integrated systems will be essential for safeguarding athletes while preserving the competitive integrity and spectacle of the sport.
-
The impact of fatigue accumulation on performance during stage races in professional road cyclists
Cumulative fatigue influences performance in professional road cyclists during stage races. This study examined the interaction between internal and external factors on performance parameters using race data from seven male professional cyclists collected over three seasons. Maximal rolling means for power output (PO) and heart rate (HR) were calculated across durations from 1 to 3600 s, and PO– and HR–duration curves were generated for grouped race days (Days 1–3 to 19–21). Mean PO and HR for 5-, 10-, and 20-min efforts were also analysed. For each effort duration, average PO, relative performance (% best), mean HR, PO/HR ratio, cumulative energy expenditure, and consecutive race days were computed. Data was analysed with mixed-effects linear models (REML). Both HR (p<0.0001) and PO (p<0.01) were altered between the first and later race days group, confirming performance declines across stages. Maintaining a higher PO/HR ratio was associated with superior 5-min (Z-score=0.5915), 10-min (Z-score=0.6524), and 20-min (Z-score=0.7299) efforts (all p<0.0001). Accordingly, cyclists with higher PO/HR ratios maintained better 10- and 20-min performance considering prior mechanical work and successive race days accumulated. Despite overall reductions in PO and HR across stages, riders able to preserve a higher PO/HR ratio under accumulated fatigue produced superior short- to mid-duration efforts, highlighting cardiovascular efficiency as a key determinant of performance during multi-stage competitions.
-
Effects of Heat Training on Nocturnal Core Body Temperature in Professional Endurance Athletes: A Pilot Study
Heat training is commonly implemented in professional endurance athletes (PEA) to promote thermoregulatory adaptation and improve performance efficiency. Although the acute physiological responses to exercise in the heat are well described, the immediate effects of a single heat training session on nocturnal core body temperature and sleep-related temperature rhythms remain poorly characterized. This pilot study investigated the impact of an acute heat training session on overnight core body temperature and associated sleep parameters in PEA.
Nocturnal core body temperature (Tc) was measured in PEA (N = 7; 3 male, 4 female) using an ingestible telemetric temperature pill (e-Celsius, BodyCAP, France) across two consecutive nights: one night before (N1) and one night after (N2) a standardized heat training session (Duration: 65.7 ± 2.6 min; maximum exercise Tc: 39.0 ± 0.3 °C). Continuous Tc was recorded throughout the sleep period on both nights. From these recordings, key circadian and sleep-related metrics were derived, including time to nadir, nadir time, nadir temperature, average nocturnal core temperature, total sleep time, and the amplitude of the nocturnal temperature rhythm.
Compared with N1, the post-training night (N2) showed a later time to nadir (mean difference: +78 min, p = 0.03), delayed nadir timing (mean difference: +80 min, p = 0.04), reduced total sleep time (mean difference: −53 min, p < 0.001), and a greater amplitude of the nocturnal core temperature rhythm (mean difference: +0.35 °C, p = 0.01). In contrast, there were no significant differences in mean nocturnal core temperature (p = 0.46) or nadir temperature (p = 0.45) between nights, suggesting that heat training primarily alters the timing and variability of nocturnal thermoregulation rather than the absolute overnight temperature level.
Increased nocturnal temperature variability, accompanied by blunted nighttime cooling and a delayed onset of core temperature decline, indicates a sustained thermophysiological load extending into the recovery period. A single heat training session modified the temporal profile and amplitude of nocturnal core body temperature and reduced total sleep time, without altering mean or nadir core temperature. These findings suggest that intensive heat training disrupts normal nocturnal thermoregulation in PEA, manifesting as delayed and more variable core temperatures during sleep.
This pattern points to a potential trade-off between pursuing heat adaptation and preserving overnight recovery, underscoring the importance of optimizing training timing and post-session recovery strategies. Moreover, the results indicate that acute heat exposure can shift the timing and stability of nocturnal thermoregulation in athletes, with consequences for sleep quality, quantity, and subsequent recovery. This may be particularly relevant during intensive training blocks and stage races.
-
Single-Session Field-Based Evaluation of Durability in Professional Male Cyclists via 5-Minute Time Trials
This study investigated endurance durability in professional male cyclists using a single-session, field-based 5-minute time trial (5min-TT) protocol under fresh and fatigued conditions. Twenty elite cyclists from a UCI ProTeam participated during a pre-season training camp. The experimental session simulated race-specific demands, combining prolonged moderate-intensity cycling with repeated high-intensity efforts on a standardized uphill road segment. Following an accumulated workload of approximately 45–50 kJ·kg⁻¹, cyclists exhibited significant declines in absolute and relative power output, torque, and PO:HR during the fatigued 5min-TT compared with the fresh condition. In contrast, heart rate and cadence remained largely unchanged. These results indicate that performance reductions were primarily driven by decreased torque rather than alterations in cadence or cardiovascular response, highlighting the role of neuromuscular mechanisms in fatigue resistance. The dissociation between power output and heart rate suggests that PO:HR decoupling may serve as a practical marker of endurance durability during high-intensity efforts. Overall, the findings demonstrate that a single-session, field-based 5min-TT is a feasible and effective method for assessing durability in professional cyclists.
-
Two riders, one output: how ability and position shape tandem performance
Tandem cycling requires two riders to coordinate their effort while operating under shared mechanical constraints. Previous research has shown that tandem cyclists produce less power than expected from their individual solo performances, but the influence of partner matching and rider position remains unclear. This study examined whether differences in individual cycling capacity affect tandem performance and whether rider position (pilot or stoker) influences physiological, perceptual, and pacing responses. Twenty-three trained cyclists without tandem experience completed 10-minute time trials in three conditions: solo, equal-capacity tandem (≤25 W difference in solo power output), and unequal-capacity tandem (≥40 W difference). Mean power output, heart rate, cadence, rating of perceived exertion (RPE), and pacing behaviour were recorded. Pilot and stoker positions were counterbalanced as far as possible. Linear mixed-effects models and time-dependent analyses were used to assess the effects of pairing condition and rider position. Compared with solo cycling, equal-capacity tandems showed lower power output (-3.9%), heart rate (-2.3%), and RPE (-11.5%). Unequal-capacity tandems showed only a small reduction in heart rate (-2.7%), with no significant reduction in power output. Stokers produced less power than during solo cycling (-5.3%) and less than pilots (-3.7%), while reporting lower perceived exertion (-13.9%). Pilots maintained power output comparable to solo cycling despite lower heart rates (-2.9%). Cadence did not differ between conditions. Combined tandem power averaged 95.6% of the summed solo power outputs, and differences in partner capacity were not associated with combined performance. Pacing profiles were broadly similar across conditions, whereas perceived exertion was lower during tandem cycling, particularly during the early phase of the trial. These findings indicate that short-duration tandem performance was influenced more by rider position and shared mechanical constraints than by differences in cycling capacity between partners. Tandem performance therefore appears to reflect how individual capacity is expressed within a mechanically coupled rider–bicycle system, rather than the simple summation of two solo performances.
-
Modelling cornering speed in road cycling
Cornering performance is a key factor in downhill road cycling, yet the mechanisms governing speed regulation in turns remain poorly quantified. In this study, three professional cyclists performed repeated descents of a ~3 km road segment, with speed recorded at 10 Hz and turn geometry characterised through curvature. Minimum speeds in turns were found to be consistent across riders and primarily determined by the curvature radius R, with sharper turns leading to lower speeds. This behaviour is well described by a friction-based model vlim = (μ*g*R)1/2, which accurately predicts whether braking is required. A dynamical model incorporating this constraint reproduces the measured speed profiles and correctly identifies braking locations. These results demonstrate that a simple friction-based framework captures the main mechanisms governing speed regulation in downhill cycling and can be used to provide pre-race guidance on achievable speeds and appropriate precautions in each turn. -
Kinematic analysis at different pedalling intensities and slopes in competitive cross-country athletes: preliminary results
Background
To enhance the cyclist’s efficiency, the bike fitting is carried out with the goal of improving performance (1). Although bike fitting is usually done without simulating any climb, slopes can still impact the cyclist's pedalling. The aim of this study was to evaluate the three-dimensional kinematics at different pedalling intensities and slopes in competitive cyclists.
Methods
Eleven off-road cyclists were recruited. Firstly, each participant completed an incremental test with a power increase of 15 W per minute until exhaustion. During the test, a gas analyser (MetaLyzer 3B) was used to assess the VO2max. Then, 48 h later, each cyclist performed 4 trials of 2 minutes at different intensities (65%, 75%, 85%, 95% of the VO2max) and the bike set at a 0° slope with a 3-minute rest between trials. Subsequently, the same 4 trials were repeated with a 10° slope. For the kinematic analysis, a 3D motion capture system (STT Systems) was used (2). For statistical analysis, the following parameters were considered: ankle flexion (AF), knee flexion (KF), hip flexion (HF), vertical hip oscillations (VHO) and shoulder flexion (SF).
Results
Regarding KF, we found significant differences across intensities (p=0.047) and between slopes (p=0.007). It had found a significant difference in VHO in the interaction across intensities and slopes (p=0.020). A significant difference in SF was observed across intensities (p<.001). We found no significant difference in NSI in AK, KF, HF, and SF. The NSI of the VHO increased significantly compared to trials at 65% and 85%.
Conclusions
Our results suggest that both slope and intensity influence three-dimensional kinematic values and the bilateral symmetry index, key parameters for movement efficiency. For this reason, and given the physiological demands of cross-country racing, we recommend that cycling biomechanics professionals consider slope and intensity when performing bicycle biomechanical measurements.
-
Effects of small cadence variations on joint mechanics in highly trained track cyclists
A track bicycle’s gear ratio (and consequently, cadence) can influence muscle force production, shortening speed, and activation rate, ultimately affecting joint-specific power transfer to the crank, energy cost and fatigue. However, the impact of small, practical cadence adjustments on joint mechanics during fatiguing, race-specific intensities in the aerodynamic position remains unknown. Understanding how joint power is distributed during pursuit-specific workloads may reveal strategies cyclists use to sustain high power under fatigue. This study examined the effects of small cadence variations (preferred, ±5 rpm) on joint mechanics (power, angular velocity, and moment) using statistical parametric mapping to identify where within the pedal stroke differences occurred, and to explore the interaction between joint torque and angular velocity in generating joint power. Thirteen highly trained track cyclists completed three 2-min constant work rate trials at individual pursuit race intensity. Higher cadences (+5 rpm) increased hip and knee joint moments concentrated around the crank cycle’s transition phases (i.e. top and bottom dead center) where higher angular velocities demanded greater neuromuscular control. Ankle moment differences were larger than hypothesized, decreasing during the downstroke and increased during upstroke, suggesting a key role in managing faster proximal-segment angular velocities through stabilization and transmitting forces to the crank. These findings highlight the value of time-series analysis for revealing cadence-specific biomechanical adaptations that are typically overlooked by discrete metrics, highlighting the importance of individualized cadence selection in pursuit cycling.
-
Chasing Points: Optimal Rider Allocation in Cycling
Prior to 2020, the UCI point system primarily served as a metric for prestige. The Pro-Continental Teams fought for automatic wildcards and the nations for extra spots at the World Championships or the Olympic Road Race. However, the 2020 regulatory overhaul transformed these points into a promotion and relegation system between the WorldTour and ProTeam levels, through three year cycles. This led to a large shift in focus for teams to achieve the goal of promotion or evade relegation; and even to evade promotion to the World Tour. Despite the rise of cycling analytics over the last decade, the prediction of team-wide or single-rider point accumulation remains under-represented in peer-reviewed literature.
This study leverages public data and machine learning to predict the season total of UCI points a rider will collect. Our feature set incorporates rider history, team context, course difficulty and rider-race performance features of 19,359 riders across 10 seasons. We train an XGBoost ranking model to predict within-race finishing order and evaluate its performance on held-out race data using race-level ranking metrics such as winner identification, top-k overlap, and rank correlation. The prediction model significantly outperforms a naive baseline across multiple evaluation metrics, demonstrating strong predictive capability in identifying race outcomes and point accumulation patterns. In particular, the model shows strong performance in identifying race winners and top-ranked riders, enabling realistic simulation of season-level point distributions.
The model is then embedded in a season simulation framework that converts race-level ranking scores to expected points through race-specific UCI point scales. By framing season planning as a Linear Programming problem, we are able to optimize a race schedule for a given team based on their riders and the races on their program. Given the expected UCI points for each rider and race combination, the optimization engine computes the mathematically optimal roster, while respecting constraints (e.g., a maximum of 85 race days per rider).
From an applied perspective, our model enables teams to optimize race calendars, evaluate transfer targets through points-per-cost analyses, and strategically manage promotion or relegation risks within the current system. More broadly, our findings highlight how the UCI points reform has not only changed competitive outcomes but also introduced measurable incentives for strategic behavior in professional cycling.
-
Exogenous lactate supplementation: 28-day ingestion of a novel lactate-ketone ester is feasible, safe, and increases haematocrit. Data from a double-blind, randomized, controlled crossover trial
Introduction
Ketone supplements, such as ketone monoesters and ketone diols, have been used over the past decade to improve athletic performance, particularly recovery in elite cyclists. Exogenous lactate is less extensively investigated and has predominantly been administered as sodium lactate, which is associated with severe gastrointestinal side effects. Lactate supplementation has been proposed as a potential ergogenic aid, as lactate is endogenously preferred over glucose as a fuel during exercise.
Here, we introduce a novel lactate–ketone ester, (R)-1,3-butanediol (S)-lactate ester (LaKe), which provides dual supplementation with lactate and the ketone body beta‑hydroxybutyrate (BHB) and exhibits metabolism similar to that of ketone monoesters. In this first human clinical study of LaKe, we report: (1) circulating concentrations of lactate and BHB following ingestion of 25 mL LaKe; (2) preliminary feasibility and safety of 28 days of LaKe supplementation; and (3) hematological adaptations in otherwise healthy adults living with obesity.Material and methods
In a double-blind, randomized, controlled crossover study, 10 healthy participants with obesity received 28-day LaKe and taste-matched noncaloric placebo (PLA) regimens of 2 daily doses (25 mL/dose) separated by a 28-day washout period. After each intervention period, participants were studied on day 29 after an overnight fast before consuming the allocated intervention followed by continuous blood sampling. Gastrointestinal tolerability was assessed via the Beverage Tolerability Questionnaire (BTQ).
Results
Ten healthy participants with obesity were included (5 men; age 44 ± 7 years; all Caucasian). Following LaKe ingestion, lactate and BHB concentrations peaked at 2.15 mM (IQR: 1.50–2.65) and 0.60 mM (IQR: 0.50–0.70), respectively. No significant changes in heart rate, blood pressure, or organ‑specific biomarkers were observed after 28 days of twice‑daily ingestion of either LaKe or PLA (all P > 0.05).
Nausea and diarrhea were more frequent in the LaKe condition (both P = 0.07) and were overall characterized as mild to moderate gastrointestinal side effects. No participants reported tolerability issues related to the cardiovascular, respiratory, or musculoskeletal systems. We observed an increase in hematocrit (0.40 vs. 0.39; paired difference 0.01 [95% CI: 0.00–0.01], P = 0.011), which was not associated with circulating erythropoietin (EPO; P = 0.37), markers of erythropoiesis or hemolysis, or biomarkers related to hydration status (all P > 0.05).Conclusions
LaKe simultaneously elevates circulating BHB and lactate concentrations without affecting safety biomarkers. Twenty‑eight days of intermittent exogenous ketosis and hyperlactatemia appears feasible and safe, although associated with mild to moderate gastrointestinal side effects. LaKe increased hematocrit through currently unknown mechanisms. Further studies are warranted to determine whether LaKe supplementation influences athletic performance and/or recovery.
-
Factors influencing pedaling effectiveness: a systematic review
A systematic literature review was conducted using PubMed, Scopus, SPORTDiscus, and Web of Science. The search strategy included the following terms: (technique pedaling and cyclist) OR (effectiveness and smoothness pedaling) OR (biomechanics of pedaling in cyclist) AND NOT ("rehabilitation" OR "therapy" OR "injury recovery" OR "clinical"). Studies focusing on clinical or rehabilitation contexts were excluded to maintain relevance to performance-oriented cycling.
The findings indicate that IE is not determined by a single biomechanical or physiological variable, but rather by the interaction of multiple factors. Variables such as medio-lateral force, muscle activation patterns, asymmetry, and anthropometric characteristics do not consistently influence IE across studies. In contrast, cadence and workload show more stable and predictable effects, with higher cadences generally reducing IE and increased workload tending to enhance it.
Training interventions have also demonstrated measurable effects on pedaling mechanics. A 12-week hip flexor strengthening program resulted in a reduction of negative torque (~14%) and an increase in propulsive torque (~3%) in trained cyclists. Additionally, increases in pedal force have been associated with improvements in both gross efficiency and IE, suggesting a link between force application and mechanical effectiveness.
Despite these findings, the relationship between IE and cycling performance remains inconsistent. In some cases, improvements in IE do not translate into meaningful performance gains, indicating that IE alone may not fully capture the complexity of pedaling efficiency. One of its main strengths lies in its ability to provide a direct mechanical description of force application; however, this reductionist approach may overlook important aspects such as coordination variability and fatigue-related changes.
Furthermore, most of the studies analyzed were conducted under controlled laboratory conditions, often using fixed workloads and constrained cadences. While this improves internal validity, it limits ecological validity and reduces the applicability of findings to real-world cycling scenarios, where conditions are highly variable.
Alternative metrics, such as pedal smoothness, have received comparatively less attention in the literature but may offer complementary insights into pedaling technique. These approaches could provide a more integrative perspective by capturing aspects of movement quality not reflected in IE alone.
In conclusion, while IE remains a useful and accessible metric for analyzing pedaling mechanics, it should not be interpreted in isolation. Future research should adopt a multidimensional approach, integrating mechanical, physiological, and performance-based variables to achieve a more comprehensive understanding of cycling performance and pedaling technique.
